The Best Price Industrial Forklift 8.25-15 Tyre Inner Tubes
Zihai Rubber was founded in 1995. It has two factories of Pingdu Zihai Rubber Manufactory.Ningxia NingjieZihai Rubber Co., Ltd. and Qingdao Laoshan District International Business Department. Our company has a registered capital of 50 million yuan, total assets of 120 million yuan, covers an area of more than 30,000 square meters, and employs more than 300 people. A comprehensive import and export manufacturer integrating the production and sales of OTR tires and matching inner tubes, AG tires and matching inner tubes, Industrial tires and matching inner tubes, Forklift tires and matching inner tubes, truck tires and matching inner tubes, car inner tubes and a ful range of flaps. The average daily output of inner tubes is more than 10,000 pieces. Our company has successively passed ISO9001 Quality System Certification, ISO14001 Environmental Protection System Certification, OHSAS18001 Health Management System Certification, 3C Compulsory Product Certification, American DOT certification, Inner Tube Safety Certification and other relevant domestic and foreign certifications, and fully implements TS16949 Quality Management System and implements standardized operations , has established a sound and complete inspection system, is the vice president unit of Pingdu Rubber Association, and a national AAA-level standardization good behavior enterprise. Since establishment, our company has always adhered to the tenet of "Quality first, Customer first" and the business policy of "Honesty and Credit, Mutual Benefit and Reciprocity".
Zihai rubber offer industrial forklift tyre inner tube 28X9-15:
| Material |
Size |
Valve |
Wight |
Mpa |
| Natural |
28X9-15 |
TR75A,TR177 |
1.65kg |
9Mpa,14.7Mpa |
| Butyl |
28X9-15 |
TR75A,TR177 |
1.50kg |
7.5~8Mpa,8.4-9Mpa |
* Product Picture:
* We ALSO DO MORE MODELS:
| SIZE OF THE TUBE |
VALVE TYPE |
SIZE OF THE TUBE |
VALVE TYPE |
| 8.25-15 |
TR75A |
5.00-8 |
TR13,TR87,JS2 |
| 23X5,5.00-13 |
TR13,TR87,JS2 |
400/4.80-8 |
TR13,TR87,JS2 |
| 8.25-12 |
TR87 |
18X9-8,900-8 |
TR13,TR87,JS2 |
| 7.00-12 |
TR87,JS2 |
18X8.50-8 |
TR13,TR87,JS2 |
| 6.50-10 |
TR87,JS2 |
17X8.00-8 |
TR13,TR87,JS2 |
| 7.00-9 |
TR87,JS2 |
800-8 |
TR13,TR87,JS2 |
| 6.00-9 |
TR87,JS2 |
|
|
| 18X7-8 |
TR13,TR87,JS2 |
|
|
* Installation and safety instructions read carefully:
1/ Be sure tube size is correctly matched to your tire size. Each individual tube is assembled with a heavy duty stem,nuts and one valve cap. Before inserting tube in the tire the tire inner compartment must be carefully inspected to be sure there is no debris, cracks or other defects.
2/ Before placing the tire and tube on rim,the rim must be inspected to be sure there is no defect on deformity.Also,be sure that rim is not bent and has no rust loose or rough spoke heads or other sharp surface that could damage the tube or tire.Always use a rim strip to cover all spoke heads.
3/ Mount carefully. Fasten the nuts with a wrench. Do not use sharp tools such as a screwdriver,etc,that could hurt the tube or tire bead. For highway use,a rim lock is recommended safety.
4/ When placing the tire and tube on the rim,great care must be taken to ensure that the valve stem is properly seated in the rim protruding for inflation and that the rubes is not caught nor pinched between the tire and rim.
5/ Once the tire and tube have been placed on the rim,inflate the tube to 10 PSI then, deflate and check to be sure the tire and tube are properly seated on the rim.Inflate the tube to the tire manufacturer's recommended air pressure found of the side wall the tire. The rim line must be visible all the way around both sides.
6/ Do not over inflate. Either case can cause the valve stem to separate from the tubes resulting in possible injury. Check air pressure on a regular basis.Also, check valves stem for leakage and tighten the valve core if needed.
* Production flow:
Mix rubber--Squeeze out--Cut--Joint two end--Install valves--Vulcanization--24 hours gas tightness inspection---100%(one by one) quality checking--Packing--Loading
* Package:
We provide the following packages:
(1) Plastic bag and woven bag
(2) Plastic bag and carton box
(3)According to your requirement
* Shipment:
(1) By Air
(2) By Sea(Container size:20GP,40HQ or LCL acceptable)
(3) By Land(Road or Railway)
* Why choose us:
(1)Own Factory: We are specialized manufacturer of tyre inner tubes and flaps, with high quality and competitve price.
(2)Experience: 20 years of production and 10 years export experience.
(3)High Quality: With CCC, ISO9001:2008, CIQ certificates.
(4)Various Size: Higher standard mould designed, more than 100 sizes for your choose.
(5)Time Delivery: Efficient production and availability timely delivery.
(6)Supply Sample: We can supply samples for quality confirm.
(7)Our Team: Have the professional research and development team, operation team,quality inspection department can keep steady fine quality,good finish and durable in using.
(8)Our Service: Best after sales service team make our business more frequently and easily.
* Certifications:
Now we have established a solid and effective marketing network and service system at home and abroad. Products are sold to 29 provinces, municipalities and autonomous regions across the country, exported to more than 30 countries and regions, and enjoys a high reputation in domestic and foreign markets.
Sincerely welcome all friends to come to our company to discuss cooperation and create brilliance together!
Please Feel Free To Inquiry. We Are Willing to Help Anytime!
Audited Supplier 
){kind=link}
){kind=link}